Vario snow plough VS-L

With the new Vario snow plough we present another high-quality product for the professional winter service. A main feature of the „VS-L“ is its universal applicability. It was especially developed for areas where streets with driveways or squares have to be cleared. The shields can be moved seperately and can be brought in an Y-position, so that the snow is not thrown out on the sides. The shields can be also brought in to a side clearing position or in a V-position. For operating the snow plough, we offer three different steering options, for moving the shield seperately or synchronously. The plough locking by springs flaps can be adjusted to two thicknesses.

 attachment variants

  • attachment with coupling plate
  • 3-point linkage
  • attachment frame for wheel and farm loaders, including height adjustement

A detailed description of the different attachment variants can be found at the page of the coupling systems.

standard equipment

  • plough with two blades - laterally heightened
  • hydraulic lateral adjustment, secured by a pressure control valve and hydro accumulator
  • standard steering (2 double acting control units required)
  • double acting lifting cylinders with adjustable upper control arms (with lowering throttle valve) - not for 3-point linkage
  • spring flaps – plough locking 2-fold adjustable
  • sliding plates - height adjustable
  • pendulum compensation - lockable
  • screwed scraping edge (150 x 15 mm) from low-wear, hardened high performance steel (450 HB)
  • prepared for hydraulic rotation device
  • automatic horizontal compensation
  • big dimensioned, replaceable side deflectors
  • warning flags
  • LED lighting
  • plough sided coupling plates orig. Hauer or EURO size 3, 3-point linkage or attachment to wheel or telescopic loaders
  • 4 short connection hoses with coupling halves

additional equipment

  • lateral side adjustment of seperate shields by  "Komfort" steering by 1 double acting control unit incl 1 E-button, incl. control box
  • lateral side adjustment of seperate shields by "Profi" steering (synchronic movements of shields) by 1 double acting control unit incl 2 E-buttons , incl. control box

The required plough function can be selected on the control box and controlled with the lever of the control unit. For using the snow plough on different vehicles, the control box can be taken into the other vehicle.

  • sliding plates, continously height adjustable - with crash damper
  • snow deflector - rubber
  • rubber edge (GU 200x40mm)
  • Küper scraping edge
  • hydraulic horizontal rotation device, 14° left / 14° right

 types + technical data

type / width (mm) VS-L 2400 VS-L 2600 VS-L 2800 VS-L 3000 VS-L 3200

clearing width at max. inclination (with side deflectors)

2020 2190 2360 2530 2700
min. transport width at max. inclination 2120 2290 2460 2630 2800
min. transport width without max. inclination (max. width) 2550 2750 2950 3150 3350
plough height - centre / outside 890/1000 890/1000 890/1000 890/1000 890/1000
pivot angle (degree) +/- 32,5 +/- 32,5 +/- 32,5 +/- 32,5 +/- 32,5
weight in serial equipment with coupling plate (3-point attachment) 592 (520) 607 (535) 622 (550) 637 (565) 652 (580)



technical note

Figures and details are approximate and non-binding and change slightly depending on changes in design or construction. Pictures can deviate from the standard scope of supply.
Subject to technical changes and errors!