snow plough SRS-3

The three-blade snow plough “SRS-3” is perfect for use in high "thick" snow.

The plough's solid construction, technically perfect release system, and optimum ejector actions are based on years of experience in developing snow clearing equipment. Innovative ideas and and practice-based customer feedback play an important role here. The design of the “SRS-3”  is essentially supported by the plough's robust frame, the broad bearing surfaces of the large bolts, the robust rotating mechanism and  the three-part plough blade. This generates maximum stability with optimised weight. Only high-quality fine-grained steels are used to build the "SRS-3", and similarly only low-wear, fully hardened high-performance steel with a hardness of 450 HB (Brinell hardness) are used for the scraping edge. The overall design of the snow plough is relatively short, in order to be as close as possible to the carrier vehicle. Production using modern, efficient manufacturing equipment and complying with ISO 9001 ensures that customer who decide for the “SRS-3” have a reliable, high-quality product with perfect engineering.



Video of SRS-3 in use.




 

 attachment variants

 

  • attachment with coupling plate
     
  • 3-point linkage
     
  • attachment frame for wheel and farm loaders, including height adjustement
     

A detailed description of the different attachment variants can be found at the page of the coupling systems.

 operating principles of the SRS system

The lower swings are kept in operating position by the snow pressures, pull-back springs and guide track rollers.
If the plough blade hits a small obstacles, it moves upwards and slightly backwards. If it hits a larger obstacle the SRS snow plough moves completely upwards and backwards and then again back in operation position.
The towing vehicle does not need to be stopped.

For lighter snow clearing work you can remove pressure or demount seperate pull-back springs very easily. This causes the plough share to slide easily over any obstacles.

 standard equipment

 

  • plough with three blades - laterally heightened
  • "SRS" - plough locking
  • 4 pull back springs per plough share
  • hydraulic lateral adjustment, secured by a double shock valve
  • double acting lifting cylinders (with lowering throttle valve) - not for 3-point linkage
  • optional:
    - continuously height adjustable super-elastic-wheels or
    - continuously height adjustable sliding plates
  • pendulum compensation - lockable
  • screwed scraping edge (150 x 15 mm) from low-wear, hardened high performance steel (450 HB)
  • automatic horizontal compensation in lifted position
  • big dimensioned, replaceable side deflectors
  • parking props
  • LED lighting 12/24V
  • warning flags
  • plough sided coupling plates orig. Hauer or EURO size 3, alternative 3-point linkage
  • 4 connection hoses short with coupling halves

 

 additional equipment

You can adapt the snow plough "SRS-3" optimally to your individual requirements with our additional equipment in order to make your snow clearing work more efficient.

  • snow dust shield, adjustable
  • snow deflector - rubber
     
  • hydraulic horizontal rotation device for clearing the pavement 14° left / 14° right
    (additional lines or directional control valve necessary)

     
  • rubber edge GU 200 x 50mm
     
  • KÜPER scraping edge S36

 types + technical data

 

type / width (mm) SRS-3 3000 SRS-3 3200 SRS-3 3400 SRS-3 3600

clearing width with max. inclination

2560 2730 2900 3070

plough height centre / side

1200 / 1400

min. transport height with max. inclination

2740 2910 3080 3250
min. transport height without max. inclination (max. width) 3180 3380 3580 3780
max. vehicle height with max. inclination 2070 2240 2410 2580
weight with coupling plate (kg) 1100 1130 1150 1170
weight with 3-point linkage (kg) 1000 1030 1050 1070

 

 


technical note

Figures and details are approximate and non-binding and change slightly depending on changes in design or construction. Pictures can deviate from the standard scope of supply.
Subject to technical changes and errors!