shovels POM / HL

 earth shovel with / without teeth

The special shape of the earth shovel guarantees a practical use.

The scraping edge is made of hardened and wear resistant high performance steel with a hardness of approximately 450 HB and therewith guarantees long durability.

 
width (mm) height / depth volume (m³) weight (kg)
1200 700 / 760 0,42 138 / 144
1400 700 / 760 0,47 167 / 173
1600 700 / 760 0,53 185 / 192
1800 700 / 760 0,60 203 / 211
2000 700 / 760 0,67 218 / 227
2200 700 / 760 0,73 254 / 269
2400 700 / 760 0.80 275 / 302

 

 light material shovel long / short

The light material shovel is designed similar to the earth shovel.
The scraping edge is made of hardened and wear resistant high performance steel, which is ideally suited for leveling works and has a hardness of approximately 450 HB and therewith guarantees long durability.

The light material shovel is typically used for loading snow, wood chips or grain.

There are two types available:

  • The light material shovel long is the bigger type and has a higher loading capacity.
     
  • The light material shovel short has a smaller capacity.

 

width (mm)

type

height/depth

volume (m³)

weight (kg)

1800 short 670/870 0,68 182
1800 long 800/1000 0,92 223
2000 short 670/870 0,76 195
2000 long 800/1000 1,02 239
2200 short 670/870 0,84 221
2200 long 800/1000 1,12 268
2400 short 670/870 0,92 234
2400 long 800/1000 1,23 287
2600 long 800/1000 1,36 330

 

light material shovel strengthened version

 light material shovel strengthened version

The strengthened version of the light material shovel is designed for hard works.
The features: strengthened shovel side parts, big dimensioned wearing strips at the bottom of the shovel, an additional strengthening at the top of the shovel and stronger dimensioned sheet metal at the rear edge of the shovel.

width (mm) height / depth volume (m³) weight (kg)
2000 800 / 1000 1,02 280
2200 800 / 1000 1,12 323
2400 800 / 1000 1,23 344
2600 800 / 1000 1,34 365

 

 large sized shovel

If bigger handling volumes of light material is necessary, we recommend the large sized shovel. A bar in the middle of the shovel body fosters stability and it is strengthening the construction.

 

width (mm) height / depth volume (m³) weight (kg)
2000 1030 / 1220 1,70 340
2200 1030 / 1220 1,90 371
2400 1030 / 1220 2,10 417
2600 1030 / 1220 2,30 448

 

 high-tip light material shovel

The high tip - light material shovel is especially used wherever high loading heights are required. The shovel enables loading trucks with smaller front loaders. 

width (mm) volume (m³) weight (kg)
2000 1,00 455
2200 1,12 475
2400 1,23 500
2600 1,34 520

The free dumping height at the lower edge of the shovel is approx. 550mm over the rotating point of the loading arm (varying due to attachment height / tyres of the tractor). You gain an additional lifting height of 1160mm. 

 

 multi gripper shovel „MGS“

The multi gripper shovel was developped for the universal, lighter use. It is ideally suited for loading light cuttings from trees or bushes, smaller pieces of round timber,  manure and other loose or bulky material. The tines on the sides are fixed with screws and can be demounted easily if they are not needed. Optional side covers can be delivered so that no material drops out on the sides.

The multi gripper shovel can also be used on telescopic and wheel loaders.
Due to higher hydraulic pressures a pressure relief valve for the cylinders is necessary. Appropriate coupling plates can delivered on request.
 

width
(mm)
tines height
(mm)
depth
(mm)
max.
opening width
(mm)
volume
(m³)
weight (kg)
1400 8 760 830 1300 0,80 299
1600 9 760 830 1300 0,94 330
1800 10 760 830 1300 1,06 362
2000 11 760 830 1300 1,18 393
2200 12 760 830 1300 1,30 425

 

 5 in 1 multi functional shovel

Five functions combined in one shovel:

  • earth and transport works with closed shovel
  • leveling works with opened shovel
  • gripping of loads (stones, tree trunks, …..)
  • dosed emptying and filling of the shovel with folding function
  • emptying the shovel at high loading heights (similar to high tip shovel)
width
(mm)
cutting edge volume SAE (m³) height
(mm)
depth
(mm)
max.
opening width
(mm)
weight (kg)
1600 150/16 0,53 700 760 975 364
1800 150/16 0,60 700 760 975 392
2000 150/16 0,67 700 760 975 419
2200 150/16 0,73 700 760 975 471
2400 150/16 0,80 700 760 975 501

 

 silage gripper shovel „SGS“

The „SGS“ is ideally suited for removing  gras and corn silage from the horizontal silo. The stable gripper has crescent-shaped tines and the strong hydraulic cylinder garantuees a clean removal and an ideal use of the shovel content.

The "SGS" can also be ordered for using on telescopic- and wheel loaders.
Due to the higher hydraulic pressure, a pressure relief valve is necessary. Suitable coupling plates can be delivered on request.

width
(mm)
tines bearings strengthener max.
opening width
(mm)
volume
(m³)

volume, level meas (m³)

weight (kg)
1600 5 2 1 1320 0,90 0,52 430
1800 6 3 1 1320 1,00 0,58 460
2000 6 3 1 1320 1,10 0,65 480
2200 7 3 2 1320 1,25 0,72 537
2400 7 3 2 1320 1,35 0,79 548
2600 8 3 2 1320 1,45 0,86 576

 

 silage gripper shovel "SGS-2“

This silage gripper shovel "SGS-2" ist an alternative to the standard silage gripper shovel.

This shovel enables the user a complete emptying of the horizontal silo with opened gripper.

The "SGS-2" can also be ordered for using on telescopic- and wheel loaders. Due to the higher hydraulic pressure, a pressure relief valve is necessary. Suitable coupling plates can be delivered on request.

                                                                                                                                                                                                                                                                                                                                                                                                                                            

width
(mm)
tines bearings   strengthener max.
opening width
(mm)
volume (m³) volume,
level meas (m³)
weight (kg)
1600 5 2 1 1320 0,90 0,60 430
1800 6 3 1 1320 1,00 0,67 460
2000 6 3 1 1320 1,10 0,75 480
2200 7 3 2 1320 1,25 0,82 537
2400 7 3 2 1320 1,35 0,90 548
2600 8 3 2 1320 1,45 0,98 576

 

 high tip - silage gripper shovel

The basis for this high tip shovel is our experience with the silage gripper shovel. The design of the gripper enables an optimal removing of the silage.

With the new shovel also big fodder mixing vehicles and bins can be easily loaded up to 5 meter height.  Big fooder mixing vehicles and bins with a max. height up to 5 metres can be easily loaded with this shovel. 

Other implement coupling systems are available on request.

On request we also inform you which coupling plates can be delivered for the respective types.

 forest gripper shovel

The forest gripper shovel has a multi-functional use in forestry and municipal administration. This shovel is developed with the experience of the silage gripper shovel.
The side sections are cut out and therefore it is perfect for loading branches, kindlings, and other bulky goods.
Due to the shape, which is similar to a shovel, it can also be used for digging and leveling.

Side sections, which are screwed to the side parts of the implement, are available as optional equipment.

width
(mm)
tines bearings strengthener max.
opening width
(mm)
weight (kg)
1600 5 2 1 1320 444
1800 6 3 1 1320 474
2000 6 3 1 1320 494
2200 7 3 2 1320 514
2400 7 3 2 1320 554

 

 log scoop with / without holding down device

Based on the special design the log scoop is perfect for using in forestry. The scraping bar is made of hardened knife steel and therefore also levelling works can be made. The opening or closing angle can be adjusted at two positions.

The log scoop is available with or without holding down device.

type scoop width (mm) weight (kg)
without holding down device 1500 147
with holding down device 1500 298

 

 

 side tip shovel

The side tip shovel is used for filling pits and channels with the tractor, where you cannot drive there in right angle position.

The shovel shifts in driving direction to the right.

width (mm) volume (m³) weight (kg)
1600 0,48 505
1800 0,61 550
2000 0,67 605
2200 0,78 630

 

 beet bucket

 The beet bucket enables you to load beets without chunks of earth. These chunks will fall through the gaps in the shovel.

width (mm) volume (m³) weight (kg)
1800 1,10 225
2000 1,20 242
2200 1,30 259
2400 1,50 276

 

 


technical note

Figures and details are approximate and non-binding and change slightly depending on changes in design or construction. Pictures can deviate from the standard scope of supply.
Subject to technical changes and errors!

The shovel body is bent roundly and smoothly. Therefore sticking of freight in the edges is avoided.

The bucket teeth are screwed on the bottom line of the scrapping edge and therefore do not leave rest material or rills on the ground at levelling or digging. 

The earth shovel is also available as a strengthened version for especially hard work. In this version, the bottom of the shovel has additional stronger wearing strips. The scraping edge, made from hardened steel, is generally 150x20mm and the side parts of the shovel are strengthened as well.